Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® A3HG2 - PA66-GF10 - BASF

Material Data Center offers the following functions for Ultramid® A3HG2:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid A datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 80 / * cm³/10min ISO 1133
温度 275 / * °C -
载荷 5 / * kg -
ASTM数据
模压收缩率, 平行 0.008 mm/mm ASTM D 955
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 4600 / 2600 MPa ISO 527
断裂应力 100 / 60 MPa ISO 527
断裂伸长率 2.8 / 12 % ISO 527
弯曲模量, 23°C 4600 / - MPa ISO 178
简支梁冲击强度, +23°C 30 / 92 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 7 / 9 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C - / 7 kJ/m² ISO 180/1A
ASTM数据
断裂拉伸强度 100 / - MPa ASTM D 638
断裂伸长率 3 / - % ASTM D 638
弯曲模量 4480 / - MPa ASTM D 790
悬臂梁缺口冲击强度, 1/8 in 53 / - J/m ASTM D 256
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 210 / * °C ISO 75-1/-2
1.5mm名义厚度时的燃烧性 HB / * class IEC 60695-11-10
测试用试样的厚度 1.6 / * mm -
ASTM数据
DTUL @ 264 psi 210 °C ASTM D 648
熔点 260 °C ASTM D 3418
电性能干 / 已调节单位Test Standard
ISO数据
相对介电常数, 1MHz 3.5 / 5.5 - IEC 62631-2-1
介质损耗因子, 1MHz 140 / 1600 E-4 IEC 62631-2-1
体积电阻率 1E13 / 1E10 Ohm*m IEC 62631-3-1
表面电阻率 * / 1E10 Ohm IEC 62631-3-2
相对漏电起痕指数 550 / - - IEC 60112
ASTM数据
体积电阻率 1E13 / - Ohm*cm ASTM D 257
其它性能干 / 已调节单位Test Standard
吸水性 7 / * % 类似ISO 62
吸湿性 2.1 / * % 类似ISO 62
密度 1200 / - kg/m³ ISO 1183
吸水率, 平衡 7 % ASTM D 570
密度 1200 kg/m³ ASTM D 792
模塑测量的特殊性能干 / 已调节单位Test Standard
ISO数据
粘数. 148 / * cm³/g ISO 307, 1157, 1628
典型数据
加工方法
注塑, 其它挤出成型
供货形式
粒料
应用
汽车, 电子电气
地区供应
亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.